Brass Fittings Parts

 Call Us Now (+91) 890 588 4710

PRODUCTS DETAILS

Compression Fitting

  • Product Lists:
    • Nut
    • Sleeve/ Olive / Ferrule
    • Union
    • Tee Union
    • Elbow Union
    • Male and Female Connector
    • 90° Male & Female Elbow Connector
    • Branch Tee
    • Run Tee
    • Reducing Union
    • 45° Male Elbow
    • Bulkhead Union

    Tube O.D = Thread size
    1/8” = 5/16" x 24
    3/16” = 3/8" x 24
    1/4” = 7/16" x 24
    5/16” = 1/2" x 24
    3/8” = 9/16" x 24
    7/16” = 5/8" x 24
    1/2” = 11/16" x 20
    5/8” = 13/16" x 18
    3/4” = 1" x 18
    7/8” = 1-1/8" x 18

    Material :
    • IS-319/CZ-121 Free Cutting
    • CA360 Brass for Barstock fittings
    • CA377 Brass for forged fittings
    • Lead Free, DZR, Bronze, etc.
    • Any special Copper alloys as per customer specifications.

    Threads :
    UNEF
    NPTF

    Finish :
    Natural Brass, Nickel Plated or any special plating as per customer requirement.

    Use with :
    Copper Tube
    Brass Tube
    Aluminium Tube
    Plastic Tube (with Insert)
    Not recommended for Steel tubing

    Pressure :
    Working Pressure up to 2000 PSI with a 4:1 safety factor depending on tube size.

    Temperature Ranges :
    -65°F to +250°F (-53° C to + 121° C) range at maximum operating pressures.

    Advantage :
    Low Cost
    No Tube Flaring necessary

    Typical Application :
    Instrumentation, Hydraulic & Pneumatic systems

    Standards :
    Confirming SAE, ASA & ASME specifications.

SAE 45 Flare Fittings

  • Product List:

    • Flare Long Nuts / Flare Forged Long Nuts
    • Flare Short Nut / Flare forged short Nut
    • Flare Forged Reducing Short Nut
    • Flare Cup Nut
    • Flare Male & Female Connector
    • Flare Stop Plug
    • Flare Tee Union
    • Flare Elbow Union
    • Flare Branch Tee
    • 90 ° Flare Male & Female Elbow
    • 45° flare Male Elbow
    • Flare Union
    • Flare Reducing Union
    • Tube Coupling Swivel Flare
    • Flare Female to Male Pipe Connector
    • Flare Male Run Tee

    Thread Chart:
    Pipe Size = SAE 45 Thread size

    • 1/8” = 5/16"-24
    • 3/16” = 3/8"-24
    • 1/4” = 7/16"-20
    • 5/16” = 1/2"-20
    • 3/8” = 5/8"-18
    • 1/2” = 3/4"-16
    • 5/8” = 7/8"-14
    • 3/4” = 1-1/16-14

    Material:
    • Brass IS-319 Free Cutting
    • CA360 Brass for Barstock fittings
    • CA377 Brass for forged fittings
    • Lead Free, DZR, Bronze, etc.
    • Any special brass material as per customer specifications.

    Threads:
    • UNEF
    • NPTF

    Finish:
    • Natural Brass, Nickel Plated or any special platings as per customer requirement.

    Use with:
    • Brass Tube
    • Copper Tube
    • Aluminum Tube
    • Steel Tube
    • All above type of tubings that can be Flared

    Pressure:
    • Working pressure up to 2000 PSI depending upon the Tubing being used.

    Temperature Ranges:
    • -65°F to +250°F (-53° C to + 121° C) at maximum operating pressures.

    Typical Application:
    • LP & Natural gas, Flamable liquids, Power steering, Refrigeration, Instrumentation, Pneumatic & Hydraulic systems

    Standards:
    • Confirming SAE, ASA & ASME specifications.

JIC 37 Flare Fittings

  • Products Lists:
    • Flare Male and Female Connector
    • Flare Union
    • Flare Stop Plug
    • 90° Flare Male & Female Elbow
    • Flare Elbow Union
    • Flare Tee Union
    • Flare Male & Female Branch Tee
    • Flare Straight Thread Lock Nut
    • Bulkhead Lock Nut
    • Bulkhead Union
    • Flare Long, Short, Cap Nut
    • Flare Sleeve
    • 90° Flare Bulkhead Elbow

    Thread Chart JIC 37 Flare Fitting
    Tube O.D = JIC 37 Thread size
    • 1/8” = 5/16"-24
    • 3/16” = 3/8"-24
    • 1/4” = 7/16"-20
    • 5/16” = 1/2"-20
    • 3/8” = 9/16"-18
    • 1/2” = 3/4"-16
    • 5/8” = 7/8"-14
    • 3/4” = 1-1/16-12
    • 1" = 1-5/16-12

    Material:
    • Brass IS-319 Free Cutting
    • CA360 Brass for Barstock fittings
    • CA377 Brass for forged fittings
    • Lead Free, DZR, Bronze, etc.
    • Any special brass material as per customer specifications.

    Threads:
    • UNEF
    • NPTF

    Finish:
    • Natural Brass, Nickel Plated or any special platings as per customer requirement.

    Use with:
    • Brass Tube
    • Copper Tube
    • Aluminum Tube
    • Steel Tube
    • All above type of tubings that can be Flared

    Pressure:
    • Working pressure up to 2000 PSI depending upon the Tubing being used.

    Temperature Ranges:
    • -65°F to +250°F (-53° C to + 121° C) at maximum operating pressures.

    Typical Application:
    • LP & Natural gas, Flamable liquids, Power steering, Refrigeration, Instrumentation, Pneumatic & Hydraulic systems

    Standards:
    • Confirming SAE, ASA & ASME specifications.

Pipe Fitting

  • Pipe Fittings:
    • Reducing Bush
    • Hex Stop Plug, Square Plug, Socket Plug
    • Cap nut
    • M/F adapter
    • Close Nipple
    • Hex Reducing Nipple
    • Female Tee Extruded
    • Female Tee Forged
    • Hex Nipple
    • Female Elbow Forged
    • Female Elbow Extruded
    • Female Coupling
    • Female Street Run Tee Extruded
    • Female Street Run Tee Forged
    • 90° M/F Street Elbow Extruded
    • 90° M/F Street Elbow Forged
    • 45° M/F Street Elbow Extruded
    • 45° M/F Street Elbow Forged
    • Reducing Coupling
    • Female Cross Extruded
    • Female Cross Forged
    • Long Nipple
    • 90° Male Elbow Forged
    • Male Branch Tee Forged
    • Male Branch Tee Extruded
    • Male Tee Forged
    • Brass Extension
    • Brass Manifold

    Thread Chart Pipe Fitting
    Pipe Size = TPI

    • 1/8” = 27
    • 1/4” = 18
    • 3/8” = 18
    • 1/2” = 14
    • 3/4” = 14
    • 1" = 11-1/2

    Material:
    • Brass IS-319 Free Cutting
    • CA360 Brass for Barstock fittings
    • CA377 Brass for forged fittings
    • Lead Free, DZR, Bronze, etc.
    • Any special brass material as per customer specifications.

    Threads:
    • NPTF

    Finish:
    • Natural Brass, Nickel Plated or any special platings as per customer requirement.

    Use with
    • Iron Pipe
    • Brass Pipe
    • Aluminum Pipe
    • Bronze Pipe
    • Copper Pipe

    Pressure:
    • Operating pressure upto 1200 PSI

    Temperature Ranges:
    • -65°F to +250°F (-53° C to + 121° C)

    Advantage:
    • Low Cost
    • No Tube Flaring necessary

    Typical Application:
    • Grease, Fuels, LP & Natural gas, Refrigeration, Instrumentation & Hydraulic systems

    Standards:
    • Confirming SAE, ASA & ASME specifications.

Hose Barbs Fitting

  • Products Lists:
    • Male and Female Hose Nipple
    • Hose Joint
    • 90° Single Barb Male Elbow
    • Yee Joint Nipple
    • Tee Joint Nipple
    • Braided Soft Hose
    • BSPT Brass Fittings

    Thread Chart Hose Barbs
    Pipe Size = TPI
    • 1/8” = 27
    • 1/4” = 18
    • 3/8” = 18
    • 1/2” = 14
    • 3/4” = 14
    • 1" = 11-1/2

    Material:
    • Brass IS-319 Free Cutting
    • CA360 Brass for Barstock fittings
    • CA377 Brass for forged fittings
    • Any special brass material as per customer specifications.

    Threads:
    • NPTF

    Finish:
    • Natural Brass, Nickel Plated or any special platings as per customer requirement.

    Use with:
    • Plastic Tubing
    • Rubber Hose
    • Intended to use with Hose clamp or crimp type ferrule

    Pressure:
    • 150 PSI maximum.

    Temperature Ranges:
    • +32°F to +200°F (0° C to + 93° C)

Air Brake Hose Ends

  • Thread Chart Air Brake Hose Ends
    HOSE I.D = Thread size

    • 3/8” = 31/32-20

    Material:
    • CA360 Brass for Barstock fittings

    Threads:
    • UNEF
    • NPTF

    Finish:
    • Natural Brass, Nickel Plated or any special platings as per customer requirement.

    Use with:
    • NT Nylon Tubing - SAE J844 type A & B

    Pressure:
    • Determined by maximum working pressure for Hose size. Upto 125 PSI.

    Temperature Ranges:
    • -40°F to +120°F (-40° C to + 48° C)

    Typical Application:
    • Air brake hose connections

    Standards:
    • Meets SAE & DOT specifications

Push on Hose Barbs

  • Thread Chart Push On Hose Barbs
    HOSE I.D = 45° SAE Flare = 37° JIC Flare

    • 1/4” = 7/16-20 = 7/16-20
    • 5/16” = 1/2-20 = 1/2-20
    • 3/8” = 5/8-18 = 9/16-18
    • 1/2” = 3/4-16 = 3/4-16
    • 5/8” = 7/8-14 = 7/8-14
    • 3/4” = 1-1/16-14 = 1-1/16-12

    Material :
    • Brass IS-319 Free Cutting
    • CA360 Brass for Barstock fittings
    • CA377 Brass for forged fittings
    • Any special brass material as per customer specifications.

    Threads :
    • UNEF
    • NPTF

    Finish:
    • Natural Brass, Nickel Plated or any special platings as per customer requirement.

    Use with :
    • Push-on type hose
    • No Hose clamp or ferrule needed

    Typical Application :
    • Low pressure Air, Fuel, Lube & Oil lines.

    Pressure : <
    • Working Pressure up to 300 PSI Maximum

    Temperature Ranges:
    • -32°F to +200°F (0° C to + 93° C)

Garden Hose Barbs

  • Thread Chart Garden Hose Barbs
    Hose ID / Pipe size = Thread size

    • 3/4” = 3/4" x 11-1/2 NH

    Material :
    • Brass IS-319 Free Cutting
    • CA360 Brass for Barstock fittings
    • CA377 Brass for forged fittings
    • Lead Free, DZR, Bronze, etc.
    • Any special brass material as per customer specifications.

    Threads :
    • NH
    • NPTF

    Finish :
    • Natural Brass, Nickel Plated or any special platings as per customer requirement.

    Use with :
    • Residential & commercial grade garden hose.

    Pressure :
    • Working pressure up to 75 PSI

    Temperature Ranges :
    • +35°F to +100°F 75 PSI at maximum working pressures.

Gas & Hydraulic Fittings

  • We are the prominent manufactures and exporter of a wide range of Brass Gas Parts to our esteemed clients. These gas parts are much preferable for thermal and electrical conductivity parts. These are superior quality brass assures high durability and strength of the brass gas parts. These are contrived using superior quality material under the guidance of our expert professionals.
    .
    Special Features :

    • Any kind of special turned parts can be made as per customer's specifications.

    Material :
    • Free cutting Brass 319 type or BS 249 type
    • Any special Brass Material Composition as per customers requirement

    Threads :
    • ISO Metric (MM Threads)
    • BA Threads
    • BSW Threads (Inches)
    • UNC, UNF Threads
    • Any threads as per custom design

    Size :
    • Begins from M2 or equivalent threads and upto any size as per custom design or requirement Finish and Coating :
    • Natural, Nickel Plated, Chrome Plated, Tin Plated, Silver Plated, Gold Plated or any coating as per customer specification

    Any kind of Brass Gas Components can be developed and supplied exactly as per customer specifications.



    Indian registered manufacturer of standard and custom tube and pipe hydraulic fittings.

    < Types of fittings include
    • JIC 37 degree,
    • metric hydraulic,
    • metric to American conversion,
    • British parallel hydraulic,
    • British taper hydraulic and
    • ISO hydraulic fittings.

    Available in different sizes.

    Materials used include
    • Brass, Copper, Aluminum, Steel and Stainless Steel.

    Applications include
    • Industrial, commercial, automotive, institutional, construction, military, agricultural and government.

    Capabilities include CNC drilling, turning, deburring, designing, precision milling and just-in-time manufacturing.
  • Brass Fittings Parts
  • Brass Fittings Parts
  • Brass Fittings Parts
  • Brass Fittings Parts
  • Brass Fittings Parts
  • Brass Fittings Parts
  • Electrical Parts