Cable Clamps

 Call Us Now (+91) 890 588 4710

PRODUCTS DETAILS

2.1 Split-Bolt Connectors with Hexagonal Head

  • Acording to British Standard.

    For Copper Conductors.

    Material :
    Body and Nut:
    Brass (CuZn).

    Surface:
    Copper-plated.

2.2 Copper Parallel Groove Clamps DIN 48072

  • DIN 48072

    For tap-off connection of copper conductors.

    Material

    Body:

    High strength copper alloy (CuNi2Si)

    Bolts:
    Stainless steel.
    Option to high strength copper alloy, F-60.
    DIN 933.

    Nuts:
    Stainless steel.
    Option to copper.
    DIN 934.

    Surface:
    Uncoated

    Conical Washers:
    Steel, DIN 6796.

    * Only with pressure-pad.

    Minimum Torque Moments:
    M6 : 7Nm
    M7 : 14Nm
    M8 : 20Nm
    M10 : 39Nm

2.3 Aluminium Parallel Groove Clamps

  • DIN 48072

    For tap-off connection of aluminium alloy conductors according to DIN 48201 & ACSR conductors according to DIN 48204

    Material

    Body:
    High strength, corrosion-resistant, aluminium alloy (AlMgSi1)

    Bolts:
    DIN 933, steel 8.8, hot-dip galvanised

    Pressure Pad:
    aluminium alloy

    Spring Washers:
    DIN 127, steel, hot-dip galvanized

    Conical Washers (According to order):
    DIN 6796, corrosion-protected

    Stainless steel A2 bolts available according to order.
    * Pressure pad and spring washers only.

    Minimum Torque Moments:
    1/4”NF : 9.5Nm
    M8 : 23Nm
    M10 : 46Nm

2.4 Copper Dead-End Clamps DIN 48201

  • DIN 48201

    For stranded copper conductors according to DIN 48201

    Material

    Body:
    High strength copper alloy (CuNi2Si)

    Bolts:
    Stainless steel.
    Option to high strength copper alloy (F60).
    DIN 933.

    Nuts:
    Stainless steel.
    Option to copper.
    DIN 934.

    Surface:
    Uncoated

    Minimum Torque Moments:
    M7 : 14Nm
    M8 : 20Nm
    M10 : 39Nm

2.5 Aluminum Corrugated Jaw-Clamps

  • DIN 48201, DIN 48204

    For Al and ACSR conductors

    Material
    body:
    Corrosion resistant, high strength aluminium alloy (AlMgSi1/Al6082).

    Bolts:
    Steel, 8.8, two bolts according to DIN 933, hot-dip galvanised two bolts according to DIN 931 (BM), hot-dip galvanised

    Conical Washers:
    Steel according to DIN 6796, corrosion-protected

    Corrugated jaw-clamps have been developed for full tension and current-carrying connections of aluminium and aluminium/steel.
    The corrugated clamp channels are additionally grooved and allow the connection of both equal and different conductor cross sections.
    All components of the clamp are captive. For installation, the clamp need not be disassembled. The (BM) bolts of the clamp are turned back up to the stop and subsequently the conductors are inserted from the side.
    If the clamps are installed as per instructions, the assemblies comply with all requirements of VDE 0210/0211 and OVE-L 11/1967.

    Minimum Torque Moments:
    M8 : 23Nm
    BM8 : 23Nm
    M10 : 46Nm
    BM10 : 46Nm
    M12 : 80Nm
    BM12 : 80Nm

2.6 Aluminum Parallel Groove Jaw-Clamps

  • DIN 48075

    For Al and ACSR connection of two equal conductor diameters.

    Body:
    Aluminium alloy (AlMgSi1/Al 6082 F32)

    Bolts:
    Steel, 8.8, hot-dip galvanised or stainless steel A2, according to order.

    Minimum torque moments :
    M10 : 46Nm
    M12 : 80Nm

2.7 Copper Bow-Type Clamps

  • Material :

    Body:
    E-cu.

    U-Bolt:
    Steel, 8.8, hot-dip galvanised

    Nuts:
    Steel 8, DIN 934 hot-dip galvanized

    Conical Washers:
    Steel DIN 6796, corrosion-protected

    Minimum Torque Moments:
    80Nm

2.8 Flat Double Terminal Clamp Al/Cu

  • TERMINALS TO BUSBAR

    Direct terminal clamp for the connection of copper and aluminium conductors to flat busbars.

    Material:
    Brass (CuZn)

    Surface:
    Tin-plated

    Bolts:
    Steel, 8.8 DIN 933, DIN 84 (M5), Electro Tin-plated

    Spring Washers:
    Steel, DIN 127 Tin-plated

    This universal multi-range direct terminal clamp is suitable for the connection of stranded copper and aluminium cables to flat busbars. The conductor channels of the clamp are grooved to ensure good electrical contact and low contact resistance.

    The double terminal clamps are intended for use in distribution terminals fuse connecting blocks.

    Minimum Torque Moments:
    M8 : 23Nm
    M5 : 5.5Nm

  • Cable Clamps
  • Cable Clamps
  • Cable Clamps
  • Cable Clamps
  • Cable Clamps
  • Cable Clamps
  • Cable Clamps
  • Cable Clamps
  • Electrical Parts